Download Manuals, Datasheets, Software and more:



Making conducted and radiated emissions measurements

Did you know that 50% of projects fail EMI/EMC testing the first time? Intertek Testing Services reports that roughly half of products fail the initial EMC test due to a failure to apply EMC principles, lack of EMC/EMI knowledge, incorrect applications of EMC regulations, unpredicted interactions among circuit elements, or incorporation of non-compliant modules or subassemblies into the final product.

Performing pre-compliance testing greatly improves the probability of a successful first pass of full EMI compliance testing, saving you time and thousands of dollars. Companies designing products for medical, automotive, military and even multimedia applications, can benefit from investing in a pre-compliance test setup. This page discusses how adding pre-compliance testing to your product development process can accelerate product development and reduce project costs. Learn more about the basics of EMC/EMI testing.

Benefits of pre-compliance testing

If you’re developing a product, you’re making financial, time, and sometimes, an emotional investment in getting the product to market. The last thing you want is to get held up by compliance testing failures. Incorporating a pre-compliance solution into your work processes provides numerous benefits, including:

  • Early identification of potential EMI/EMC issues that may delay time-to-market and increase development costs
  • Reduction of EMI/EMC related costs
  • Increased confidence in your product before you take it to the test house
  • Immediate feedback on the impact of design changes
  • Flexibility to test on your schedule


Good EMC design techniques are not too difficult to implement if they are introduced at the earliest stages of design. If modifications need to be made later in the design to meet EMC requirements, it becomes much harder.

Take the mysteries out of EMI/EMC test setup


A typical radiated test set-up with a Tektronix RSA500 USB spectrum analyzer.

EMI/EMC pre-compliance testing doesn’t have to be hard or excessively time consuming. Based on customer feedback, Tektronix developed next-generation software with ease of use and functionality in mind, to provide pre-compliance testing for radiated and conducted measurements.

Setting up EMI/EMC pre-compliance testing starts with SignalVu-PC. This latest version of SignalVu-PC now comes with an additional option called EMCVu. EMCVu features an easy-to-use setup wizard, built-in standards and accessory setup with push-button selection capabilities. Whether you are setting up an Open-Air Test Site (OATS), or testing in your lab, EMCVu streamlines the capture and removal of ambient noise from your measurements to increase the accuracy of your pre-compliance tests without an anechoic chamber.

To learn more about using EMCVu with real time spectrum analyzers and accessories to perform pre-compliance tests for radiated and conducted emissions, download the application note here.

If you’re interested in trying a free 30-day trial of EMCVu, please click on the button below.

Download 30 day trial

Troubleshooting tips to speed up debug work


Before you invest the time and money in final product certification testing, you want confidence that your device is ready to go to the test house. When you run into a problem, you want the right tools that allow you to focus on problem areas quickly, identify the cause and take steps to remediate without incurring costly delays.

To efficiently debug, look for a solution that lets you quickly identify areas of concern and provides the level of signal insight that captures intermittent offenders. This is delivered by a combination of hardware and software.

Some of capabilities you should look for in your software solution include:

  • Quasi-Peak detector which lets you bypass non-failures and zero in on frequencies of interest.
  • Harmonic Check which allows you to test only specific harmonics and find where those emissions come from on a board using a near field probe.
  • Harmonic Markers which enables finding emissions at harmonics of a known frequency.
  • Multiple Traces allowing you to compare the Device Under Test (DUT) to Ambient Noise, previous iterations of a Device, etc.
  • Automated or manual multi-failure re-measurement, allowing you to determine if a failure is intermittent or reoccurring.
  • Report multiple measurements in multiple formats in the same user configurable report.

With hardware, Real-Time Spectrum Analyzers make EMI debug much easier. Some of the benefits provided by a real-time spectrum analyzer include:

  • The ability to capture transient and intermittent signals.
  • The ability to debug multiple sources at the same frequency.
  • Instantaneous feedback – traditional swept spectrum analyzers sweeps can take longer and result in failure in capturing important signals.

To learn more on how to use our Real-Time Spectrum Analyzers for emissions pre-compliance testing on our blog here. Additional information on troubleshooting techniques are available in the “Practical EMI Troubleshooting” application note that you can download by clicking on the button below.

Download Appnote

Standards supported by Tektronix EMI/EMC pre-compliance solutions

Tektronix’ EMCVu pre-compliance software supports EMC standards including CISPR, FCC and MIL-STD for many types of devices. To automate testing, EMCVu provides a built-in standards table allowing you to choose the applicable standard for your product and the region it will be sold in. EMCVu also allows you to configure standards not included with the ability to set frequency ranges or limit line tables for your chosen standard.

A quick summary of supported standards is below:

ISM MEDICAL Industrial, scientific and medical equipment CISPR 11 EN 55011 CFR Title 47 Part 18    
Medical electrical apparatus EN 60601-1-2
AUTOMOTIVE Vehicles, boats and internal combustion engines CISPR 12 EN 55012 CFR Title 47 Part 15(*)    
Components and modules on board vehicles CISPR 25 EN 55025      
MULTIMEDIA Sound and TV broadcast receivers CISPR 13 EN 55013 CFR Title 47 Part 15    
Information technology and telecommunications equipment (ITE) CISPR 22 (superseded by EN55032) EN 55022 (superseded by EN55032)
Professional audio/video/multimedia equipment CISPR 32 (replaces CISPR 13 and 22) EN 55032
APPLIANCES Electrical devices, household appliances and tools CISPR 14-1 EN 55014-1 CFR Title 47 Part 15    
LUMINAIRES Fluorescent lamps and luminaires CISPR 15 EN 55015 CFR Title 47 Part 15    
MILITARY Military equipment and systems       MIL-STD-461G DEF-STAN 59-411

A complete pre-compliance solution

To affordably speed you on your way, Tektronix offers a complete EMI/EMC pre-compliance testing solution including software, spectrum analyzers, accessories and EMC near-field probes.

EMC Software

Tektronix EMI/EMC pre-compliance solution starts with SignalVu-PC with EMCVu software. As a plug-in to SignalVu-PC, EMCVu provides a single user interface for all your pre-compliance needs.

Spectrum Analyzers

To provide fast, accurate measurements to assist you in finding EMI/EMC issues quickly, Tektronix offers a full line of affordable Real-Time Spectrum Analyzers. Real-Time Spectrum analyzers provide significant advantages over traditional swept enabling you to capture infrequent EMI bursts.

Download EMI/EMC Test sheet


Worldwide Spectrum Allocations Poster
Fast 3D EMC/EMI Scan with Detectus Scanning System and Tektronix Real Time Spectrum Analyzers
Customer Solution Summary CHALLENGE Eggtronic faced challenges in modeling the behavior of EMI emissions of their design layout in order to optimize it. The impact of applying …
Practical EMI Troubleshooting
Introduction EMI/EMC regulations are in place throughout the world to provide a level of protection and safety for users of …
EMI Troubleshooting with the Latest-Generation Oscilloscopes
Introduction EMI/EMC regulations help to ensure reliable operation and safety for users of electrical and electronic equipment …
Step by Step EMI Troubleshooting with 4, 5 and 6 Series MSO Oscilloscopes
This application note will help you learn the basics of EMC and EMI troubleshooting and debugging.  It introduces a 3-step troubleshooting process and introduces the basics of radiated and conducted …
EMI Pre-Compliance Testing and Troubleshooting with Tektronix EMCVu
Electromagnetic compatibility (EMC) and the related electromagnetic interference (EMI) seems to be one of those necessary evils that must be overcome prior to marketing commercial or …
Characterizing Self-Generated EMI for Wireless and IoT Products with 4, 5 or 6 Series MSO Oscilloscopes
Introduction An increasing number of manufacturers are adding or retrofitting wireless technology into new or existing products. The products that are benefiting include mobile …
Automotive EMI/EMC Pre-compliance Tests
Introduction Electromagnetic interference (EMI) regulations are in place throughout the world to provide improved reliability and safety for users of electrical and electronic …
Fundamentals of the MDO4000 Series Mixed Domain Oscilloscope
Chapter 1: Introduction The MDO4000 Series from Tektronix represents a new paradigm in instrumentation; the Mixed Domain Oscilloscope, or MDO. These are the first instruments that …
Signal and Power Integrity
Watch as panelists discuss emerging technologies and the feedback loop between signal integrity and power integrity. See how to combine jitter and power integrity analysis into a formidable tool for …